diff -Nrup linux-2.6.27/arch/arm/Kconfig linux-2.6.27-patched/arch/arm/Kconfig --- linux-2.6.27/arch/arm/Kconfig 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/arch/arm/Kconfig 2008-10-19 22:45:13.000000000 +0200 @@ -845,7 +845,7 @@ config LEDS ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ - ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \ + ARCH_AT91 || ARCH_DAVINCI || \ ARCH_KS8695 || MACH_RD88F5182 help If you say Y here, the LEDs on your machine will be used diff -Nrup linux-2.6.27/arch/arm/kernel/process.c linux-2.6.27-patched/arch/arm/kernel/process.c --- linux-2.6.27/arch/arm/kernel/process.c 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/arch/arm/kernel/process.c 2008-10-20 20:26:33.000000000 +0200 @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -155,6 +156,7 @@ void cpu_idle(void) #ifdef CONFIG_HOTPLUG_CPU if (cpu_is_offline(smp_processor_id())) { leds_event(led_idle_start); + ledtrig_cpu_busy(0); cpu_die(); } #endif @@ -162,10 +164,12 @@ void cpu_idle(void) if (!idle) idle = default_idle; leds_event(led_idle_start); + ledtrig_cpu_busy(0); tick_nohz_stop_sched_tick(1); while (!need_resched()) idle(); leds_event(led_idle_end); + ledtrig_cpu_busy(1); tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); schedule(); diff -Nrup linux-2.6.27/arch/arm/mach-pxa/include/mach/trizeps4.h linux-2.6.27-patched/arch/arm/mach-pxa/include/mach/trizeps4.h --- linux-2.6.27/arch/arm/mach-pxa/include/mach/trizeps4.h 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/arch/arm/mach-pxa/include/mach/trizeps4.h 2008-10-19 22:45:13.000000000 +0200 @@ -17,11 +17,16 @@ #define TRIZEPS4_PIC_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board */ #define TRIZEPS4_SDRAM_BASE 0xa0000000 /* SDRAM region */ -#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board CSFR register */ -#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000) /* Logic chip on ConXS-Board BOCR register */ -#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000) /* Logic chip on ConXS-Board IRCR register*/ -#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000) /* Logic chip on ConXS-Board UPSR register*/ -#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000) /* Logic chip on ConXS-Board DICR register*/ + /* Logic on ConXS-board CSFR register*/ +#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS) + /* Logic on ConXS-board BOCR register*/ +#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000) + /* Logic on ConXS-board IRCR register*/ +#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000) + /* Logic on ConXS-board UPSR register*/ +#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000) + /* Logic on ConXS-board DICR register*/ +#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000) /* virtual memory regions */ #define TRIZEPS4_DISK_VIRT 0xF0000000 /* Disk On Chip region */ @@ -54,6 +59,15 @@ #define GPIO_MMC_DET 12 #define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET) +/* DOC NAND chip */ +#define GPIO_DOC_LOCK 94 +#define GPIO_DOC_IRQ 93 +#define TRIZEPS4_DOC_IRQ IRQ_GPIO(GPIO_DOC_IRQ) + +/* SPI interface */ +#define GPIO_SPI 53 +#define TRIZEPS4_SPI_IRQ IRQ_GPIO(GPIO_SPI) + /* LEDS using tx2 / rx2 */ #define GPIO_SYS_BUSY_LED 46 #define GPIO_HEARTBEAT_LED 47 @@ -62,24 +76,66 @@ #define GPIO_PIC 0 #define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC) -#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT) -#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS) +#ifdef CONFIG_MACH_TRIZEPS_CONXS +/* for CONXS base board define these registers */ +#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT) +#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS) + +#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT) +#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS) -#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT) -#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS) +#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT) +#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS) -#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT) -#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS) +#define IRCR_P2V(x) ((x) - TRIZEPS4_IRCR_PHYS + TRIZEPS4_IRCR_VIRT) +#define IRCR_V2P(x) ((x) - TRIZEPS4_IRCR_VIRT + TRIZEPS4_IRCR_PHYS) #ifndef __ASSEMBLY__ -#define ConXS_CFSR (*((volatile unsigned short *)CFSR_P2V(0x0C000000))) -#define ConXS_BCR (*((volatile unsigned short *)BCR_P2V(0x0E000000))) -#define ConXS_DCR (*((volatile unsigned short *)DCR_P2V(0x0F800000))) +static inline unsigned short CFSR_readw(void) +{ + /* [Compact Flash Status Register] is read only */ + return *((unsigned short *)CFSR_P2V(0x0C000000)); +} +static inline void BCR_writew(unsigned short value) +{ + /* [Board Control Regsiter] is write only */ + *((unsigned short *)BCR_P2V(0x0E000000)) = value; +} +static inline void DCR_writew(unsigned short value) +{ + /* [Display Control Register] is write only */ + *((unsigned short *)DCR_P2V(0x0E000000)) = value; +} +static inline void IRCR_writew(unsigned short value) +{ + /* [InfraRed data Control Register] is write only */ + *((unsigned short *)IRCR_P2V(0x0E000000)) = value; +} #else #define ConXS_CFSR CFSR_P2V(0x0C000000) #define ConXS_BCR BCR_P2V(0x0E000000) #define ConXS_DCR DCR_P2V(0x0F800000) +#define ConXS_IRCR IRCR_P2V(0x0F800000) #endif +#else +/* for whatever baseboard define function registers */ +static inline unsigned short CFSR_readw(void) +{ + return 0; +} +static inline void BCR_writew(unsigned short value) +{ + ; +} +static inline void DCR_writew(unsigned short value) +{ + ; +} +static inline void IRCR_writew(unsigned short value) +{ + ; +} +#endif /* CONFIG_MACH_TRIZEPS_CONXS */ #define ConXS_CFSR_BVD_MASK 0x0003 #define ConXS_CFSR_BVD1 (1 << 0) diff -Nrup linux-2.6.27/arch/arm/mach-pxa/Kconfig linux-2.6.27-patched/arch/arm/mach-pxa/Kconfig --- linux-2.6.27/arch/arm/mach-pxa/Kconfig 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/arch/arm/mach-pxa/Kconfig 2008-10-19 22:45:13.000000000 +0200 @@ -170,13 +170,48 @@ config MACH_E800 Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. +config TRIZEPS_PXA + bool "PXA based Keith und Koep Trizeps DIMM-Modules" + config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" + depends on TRIZEPS_PXA + select TRIZEPS_PCMCIA + select PXA27x + +config MACH_TRIZEPS4WL + bool "Keith und Koep Trizeps4-WL DIMM-Module" + depends on TRIZEPS_PXA + select TRIZEPS_PCMCIA select PXA27x + select PXA_SSP + +config MACH_TRIZEPS5 + bool "Keith und Koep Trizeps5 DIMM-Module" + depends on TRIZEPS_PXA + select TRIZEPS_PCMCIA + select PXA3xx + select CPU_PXA320 + +choice + prompt "Select base board for Trizeps module" + depends on TRIZEPS_PXA -config MACH_TRIZEPS4_CONXS +config MACH_TRIZEPS_CONXS bool "ConXS Eval Board" - depends on MACH_TRIZEPS4 + +config MACH_TRIZEPS_UCONXS + bool "uConXS Eval Board" + +config MACH_TRIZEPS_ANY + bool "another Board" + +endchoice + +config TRIZEPS_PCMCIA + bool + help + Enable PCMCIA support for Trizeps modules config MACH_EM_X270 bool "CompuLab EM-x270 platform" diff -Nrup linux-2.6.27/arch/arm/mach-pxa/leds.c linux-2.6.27-patched/arch/arm/mach-pxa/leds.c --- linux-2.6.27/arch/arm/mach-pxa/leds.c 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/arch/arm/mach-pxa/leds.c 2008-10-19 22:45:13.000000000 +0200 @@ -24,8 +24,6 @@ pxa_leds_init(void) leds_event = mainstone_leds_event; if (machine_is_pxa_idp()) leds_event = idp_leds_event; - if (machine_is_trizeps4()) - leds_event = trizeps4_leds_event; leds_event(led_start); return 0; diff -Nrup linux-2.6.27/arch/arm/mach-pxa/Makefile linux-2.6.27-patched/arch/arm/mach-pxa/Makefile --- linux-2.6.27/arch/arm/mach-pxa/Makefile 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/arch/arm/mach-pxa/Makefile 2008-10-19 22:45:13.000000000 +0200 @@ -61,7 +61,6 @@ led-y := leds.o led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o -led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o obj-$(CONFIG_LEDS) += $(led-y) diff -Nrup linux-2.6.27/arch/arm/mach-pxa/trizeps4.c linux-2.6.27-patched/arch/arm/mach-pxa/trizeps4.c --- linux-2.6.27/arch/arm/mach-pxa/trizeps4.c 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/arch/arm/mach-pxa/trizeps4.c 2008-10-19 22:45:13.000000000 +0200 @@ -22,8 +22,8 @@ #include #include #include -#include -#include +#include +#include #include #include @@ -31,7 +31,6 @@ #include #include #include -#include #include #include @@ -40,41 +39,148 @@ #include #include +#include #include #include -#include +#include +#include #include #include #include #include #include #include +#include #include "generic.h" #include "devices.h" -/******************************************************************************************** +/* comment out the following line if you want to use the + * Standard UART from PXA for serial / irda transmission + * and acivate it if you have status leds connected */ +#define STATUS_LEDS_ON_STUART_PINS 1 + +/***************************************************************************** + * MultiFunctionPins of CPU + *****************************************************************************/ +static unsigned long trizeps4_pin_config[] __initdata = { + /* Chip Selects */ + GPIO15_nCS_1, /* DiskOnChip CS */ + GPIO93_GPIO, /* TRIZEPS4_DOC_IRQ */ + GPIO94_GPIO, /* DOC lock */ + + GPIO78_nCS_2, /* DM9000 CS */ + GPIO101_GPIO, /* TRIZEPS4_ETH_IRQ */ + + GPIO79_nCS_3, /* Logic CS */ + GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* Logic irq */ + + /* LCD - 16bpp Active TFT */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* UART */ + GPIO9_FFUART_CTS, + GPIO10_FFUART_DCD, + GPIO16_FFUART_TXD, + GPIO33_FFUART_DSR, + GPIO38_FFUART_RI, + GPIO82_FFUART_DTR, + GPIO83_FFUART_RTS, + GPIO96_FFUART_RXD, + + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, +#ifdef STATUS_LEDS_ON_STUART_PINS + GPIO46_GPIO, + GPIO47_GPIO, +#else + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, +#endif + /* PCMCIA */ + GPIO11_GPIO, /* TRIZEPS4_CD_IRQ */ + GPIO13_GPIO, /* TRIZEPS4_READY_NINT */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO54_nPCE_2, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + GPIO102_nPCE_1, + GPIO104_PSKTSEL, + + /* MultiMediaCard */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO12_GPIO, /* TRIZEPS4_MMC_IRQ */ + + /* USB OHCI */ + GPIO88_USBH1_PWR, /* USBHPWR1 */ + GPIO89_USBH1_PEN, /* USBHPEN1 */ + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, +}; + +static unsigned long trizeps4wl_pin_config[] __initdata = { + /* SSP 2 */ + GPIO14_SSP2_SFRM, + GPIO19_SSP2_SCLK, + GPIO53_GPIO, /* TRIZEPS4_SPI_IRQ */ + GPIO86_SSP2_RXD, + GPIO87_SSP2_TXD, +}; + +/**************************************************************************** * ONBOARD FLASH - ********************************************************************************************/ + ****************************************************************************/ static struct mtd_partition trizeps4_partitions[] = { { .name = "Bootloader", .offset = 0x00000000, .size = 0x00040000, .mask_flags = MTD_WRITEABLE /* force read-only */ - },{ + }, { .name = "Backup", .offset = 0x00040000, .size = 0x00040000, - },{ + }, { .name = "Image", .offset = 0x00080000, .size = 0x01080000, - },{ + }, { .name = "IPSM", .offset = 0x01100000, .size = 0x00e00000, - },{ + }, { .name = "Registry", .offset = 0x01f00000, .size = MTDPART_SIZ_FULL, @@ -105,9 +211,9 @@ static struct platform_device flash_devi .num_resources = 1, }; -/******************************************************************************************** +/**************************************************************************** * DAVICOM DM9000 Ethernet - ********************************************************************************************/ + ****************************************************************************/ static struct resource dm9000_resources[] = { [0] = { .start = TRIZEPS4_ETH_PHYS+0x300, @@ -122,67 +228,68 @@ static struct resource dm9000_resources[ [2] = { .start = TRIZEPS4_ETH_IRQ, .end = TRIZEPS4_ETH_IRQ, - .flags = (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; +static struct dm9000_plat_data tri_dm9000_platdata = { + .flags = DM9000_PLATF_32BITONLY, +}; + static struct platform_device dm9000_device = { .name = "dm9000", .id = -1, .num_resources = ARRAY_SIZE(dm9000_resources), .resource = dm9000_resources, + .dev = { + .platform_data = &tri_dm9000_platdata, + } }; -/******************************************************************************************** - * PXA270 serial ports - ********************************************************************************************/ -static struct plat_serial8250_port tri_serial_ports[] = { -#ifdef CONFIG_SERIAL_PXA - /* this uses the own PXA driver */ +/**************************************************************************** + * LED's on GPIO pins of PXA + ****************************************************************************/ +static struct gpio_led trizeps4_led[] = { +#ifdef STATUS_LEDS_ON_STUART_PINS { - 0, - }, -#else - /* this uses the generic 8520 driver */ - [0] = { - .membase = (void *)&FFUART, - .irq = IRQ_FFUART, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM32, - .regshift = 2, - .uartclk = (921600*16), - }, - [1] = { - .membase = (void *)&BTUART, - .irq = IRQ_BTUART, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM32, - .regshift = 2, - .uartclk = (921600*16), + .name = "led0:orange:heartbeat", /* */ + .default_trigger = "heartbeat", + .gpio = GPIO_HEARTBEAT_LED, + .active_low = 1, }, { - 0, + .name = "led1:yellow:cpubusy", /* */ + .default_trigger = "cpu-busy", + .gpio = GPIO_SYS_BUSY_LED, + .active_low = 1, }, #endif }; -static struct platform_device uart_devices = { - .name = "serial8250", - .id = 0, +static struct gpio_led_platform_data trizeps4_led_data = { + .leds = trizeps4_led, + .num_leds = ARRAY_SIZE(trizeps4_led), +}; + +static struct platform_device leds_devices = { + .name = "leds-gpio", + .id = -1, .dev = { - .platform_data = tri_serial_ports, + .platform_data = &trizeps4_led_data, }, - .num_resources = 0, - .resource = NULL, }; -static struct platform_device * trizeps4_devices[] __initdata = { +static struct platform_device *trizeps4_devices[] __initdata = { &flash_device, - &uart_devices, &dm9000_device, + &leds_devices, +}; + +static struct platform_device *trizeps4wl_devices[] __initdata = { + &flash_device, + &leds_devices, }; -#ifdef CONFIG_MACH_TRIZEPS4_CONXS static short trizeps_conxs_bcr; /* PCCARD power switching supports only 3,3V */ @@ -192,108 +299,63 @@ void board_pcmcia_power(int power) /* switch power on, put in reset and enable buffers */ trizeps_conxs_bcr |= power; trizeps_conxs_bcr |= ConXS_BCR_CF_RESET; - trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN); - ConXS_BCR = trizeps_conxs_bcr; + trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN; + BCR_writew(trizeps_conxs_bcr); /* wait a little */ udelay(2000); /* take reset away */ - trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET); - ConXS_BCR = trizeps_conxs_bcr; + trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET; + BCR_writew(trizeps_conxs_bcr); udelay(2000); } else { /* put in reset */ trizeps_conxs_bcr |= ConXS_BCR_CF_RESET; - ConXS_BCR = trizeps_conxs_bcr; + BCR_writew(trizeps_conxs_bcr); udelay(1000); /* switch power off */ - trizeps_conxs_bcr &= ~(0xf); - ConXS_BCR = trizeps_conxs_bcr; - + trizeps_conxs_bcr &= ~0xf; + BCR_writew(trizeps_conxs_bcr); } - pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr); + pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff", + trizeps_conxs_bcr); } +EXPORT_SYMBOL(board_pcmcia_power); /* backlight power switching for LCD panel */ static void board_backlight_power(int on) { - if (on) { + if (on) trizeps_conxs_bcr |= ConXS_BCR_L_DISP; - } else { + else trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP; - } - pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr); - ConXS_BCR = trizeps_conxs_bcr; -} -/* Powersupply for MMC/SD cardslot */ -static void board_mci_power(struct device *dev, unsigned int vdd) -{ - struct pxamci_platform_data* p_d = dev->platform_data; - - if (( 1 << vdd) & p_d->ocr_mask) { - pr_debug("%s: on\n", __func__); - /* FIXME fill in values here */ - } else { - pr_debug("%s: off\n", __func__); - /* FIXME fill in values here */ - } + pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", + trizeps_conxs_bcr); + BCR_writew(trizeps_conxs_bcr); } -static short trizeps_conxs_ircr; - -/* Switch modes and Power for IRDA receiver */ -static void board_irda_mode(struct device *dev, int mode) -{ - unsigned long flags; - - local_irq_save(flags); - if (mode & IR_SIRMODE) { - /* Slow mode */ - trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; - } else if (mode & IR_FIRMODE) { - /* Fast mode */ - trizeps_conxs_ircr |= ConXS_IRCR_MODE; - } - pxa2xx_transceiver_mode(dev, mode); - if (mode & IR_OFF) { - trizeps_conxs_ircr |= ConXS_IRCR_SD; - } else { - trizeps_conxs_ircr &= ~ConXS_IRCR_SD; - } - /* FIXME write values to register */ - local_irq_restore(flags); -} - -#else -/* for other baseboards define dummies */ -void board_pcmcia_power(int power) {;} -#define board_backlight_power NULL -#define board_mci_power NULL -#define board_irda_mode NULL - -#endif /* CONFIG_MACH_TRIZEPS4_CONXS */ -EXPORT_SYMBOL(board_pcmcia_power); +/* a I2C based RTC is known on CONXS board */ +static struct i2c_board_info trizeps4_i2c_devices[] __initdata = { + { I2C_BOARD_INFO("rtc-pcf8593", 0x51) } +}; -static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, void *data) +/**************************************************************************** + * MMC card slot external to module + ****************************************************************************/ +static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, + void *data) { int err; - /* setup GPIO for PXA27x MMC controller */ - pxa_gpio_mode(GPIO32_MMCCLK_MD); - pxa_gpio_mode(GPIO112_MMCCMD_MD); - pxa_gpio_mode(GPIO92_MMCDAT0_MD); - pxa_gpio_mode(GPIO109_MMCDAT1_MD); - pxa_gpio_mode(GPIO110_MMCDAT2_MD); - pxa_gpio_mode(GPIO111_MMCDAT3_MD); - - pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN); err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, - IRQF_DISABLED | IRQF_TRIGGER_RISING, - "MMC card detect", data); - if (err) - printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - - return err; + IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM, + "MMC card detect", data); + if (err) { + printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request" + "MMC card detect IRQ\n"); + return -1; + } + return 0; } static void trizeps4_mci_exit(struct device *dev, void *data) @@ -303,22 +365,68 @@ static void trizeps4_mci_exit(struct dev static struct pxamci_platform_data trizeps4_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .detect_delay = 1, .init = trizeps4_mci_init, .exit = trizeps4_mci_exit, - .setpower = board_mci_power, + .get_ro = NULL, /* write-protection not supported */ + .setpower = NULL, /* power-switching not supported */ }; +/**************************************************************************** + * IRDA mode switching on stuart + ****************************************************************************/ +#ifndef STATUS_LEDS_ON_STUART_PINS +static short trizeps_conxs_ircr; + +static int trizeps4_irda_startup(struct device *dev) +{ + trizeps_conxs_ircr &= ~ConXS_IRCR_SD; + IRCR_writew(trizeps_conxs_ircr); + return 0; +} + +static void trizeps4_irda_shutdown(struct device *dev) +{ + trizeps_conxs_ircr |= ConXS_IRCR_SD; + IRCR_writew(trizeps_conxs_ircr); +} + +static void trizeps4_irda_transceiver_mode(struct device *dev, int mode) +{ + unsigned long flags; + + local_irq_save(flags); + /* Switch mode */ + if (mode & IR_SIRMODE) + trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; /* Slow mode */ + else if (mode & IR_FIRMODE) { + trizeps_conxs_ircr |= ConXS_IRCR_MODE; /* Fast mode */ + + /* Switch power */ + if (mode & IR_OFF) + trizeps_conxs_ircr |= ConXS_IRCR_SD; + else + trizeps_conxs_ircr &= ~ConXS_IRCR_SD; + + IRCR_writew(trizeps_conxs_ircr); + local_irq_restore(flags); + + pxa2xx_transceiver_mode(dev, mode); +} + static struct pxaficp_platform_data trizeps4_ficp_platform_data = { - .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, - .transceiver_mode = board_irda_mode, + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = trizeps4_irda_transceiver_mode, + .startup = trizeps4_irda_startup, + .shutdown = trizeps4_irda_shutdown, }; +#endif +/**************************************************************************** + * OHCI USB port + ****************************************************************************/ static int trizeps4_ohci_init(struct device *dev) { - /* setup Port1 GPIO pin. */ - pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ - pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ - /* Set the Power Control Polarity Low and Power Sense Polarity Low to active low. */ UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & @@ -327,15 +435,9 @@ static int trizeps4_ohci_init(struct dev return 0; } -static void trizeps4_ohci_exit(struct device *dev) -{ - ; -} - static struct pxaohci_platform_data trizeps4_ohci_platform_data = { .port_mode = PMM_PERPORT_MODE, .init = trizeps4_ohci_init, - .exit = trizeps4_ohci_exit, }; static struct map_desc trizeps4_io_desc[] __initdata = { @@ -372,105 +474,80 @@ static struct map_desc trizeps4_io_desc[ }; static struct pxafb_mode_info sharp_lcd_mode = { - .pixclock = 78000, - .xres = 640, - .yres = 480, - .bpp = 8, - .hsync_len = 4, - .left_margin = 4, - .right_margin = 4, - .vsync_len = 2, - .upper_margin = 0, - .lower_margin = 0, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .cmap_greyscale = 0, + .pixclock = 78000, + .xres = 640, + .yres = 480, + .bpp = 8, + .hsync_len = 4, + .left_margin = 4, + .right_margin = 4, + .vsync_len = 2, + .upper_margin = 0, + .lower_margin = 0, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .cmap_greyscale = 0, }; static struct pxafb_mach_info sharp_lcd = { - .modes = &sharp_lcd_mode, - .num_modes = 1, - .cmap_inverse = 0, - .cmap_static = 0, - .lccr0 = LCCR0_Color | LCCR0_Pas | LCCR0_Dual, - .lccr3 = 0x0340ff02, - .pxafb_backlight_power = board_backlight_power, + .modes = &sharp_lcd_mode, + .num_modes = 1, + .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL, + .cmap_inverse = 0, + .cmap_static = 0, + .pxafb_backlight_power = board_backlight_power, }; static struct pxafb_mode_info toshiba_lcd_mode = { - .pixclock = 39720, - .xres = 640, - .yres = 480, - .bpp = 8, - .hsync_len = 63, - .left_margin = 12, - .right_margin = 12, - .vsync_len = 4, - .upper_margin = 32, - .lower_margin = 10, - .sync = 0, - .cmap_greyscale = 0, + .pixclock = 39720, + .xres = 640, + .yres = 480, + .bpp = 8, + .hsync_len = 63, + .left_margin = 12, + .right_margin = 12, + .vsync_len = 4, + .upper_margin = 32, + .lower_margin = 10, + .sync = 0, + .cmap_greyscale = 0, }; static struct pxafb_mach_info toshiba_lcd = { - .modes = &toshiba_lcd_mode, - .num_modes = 1, - .cmap_inverse = 0, - .cmap_static = 0, - .lccr0 = LCCR0_Color | LCCR0_Act, - .lccr3 = 0x03400002, - .pxafb_backlight_power = board_backlight_power, + .modes = &toshiba_lcd_mode, + .num_modes = 1, + .lcd_conn = (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL), + .cmap_inverse = 0, + .cmap_static = 0, + .pxafb_backlight_power = board_backlight_power, }; static void __init trizeps4_init(void) { - platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices)); + pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config)); + if (machine_is_trizeps4wl()) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config)); + platform_add_devices(trizeps4wl_devices, + ARRAY_SIZE(trizeps4wl_devices)); + } else { + platform_add_devices(trizeps4_devices, + ARRAY_SIZE(trizeps4_devices)); + } -/* set_pxa_fb_info(&sharp_lcd); */ - set_pxa_fb_info(&toshiba_lcd); + if (0) /* dont know how to determine LCD */ + set_pxa_fb_info(&sharp_lcd); + else + set_pxa_fb_info(&toshiba_lcd); pxa_set_mci_info(&trizeps4_mci_platform_data); +#ifndef STATUS_LEDS_ON_STUART_PINS pxa_set_ficp_info(&trizeps4_ficp_platform_data); +#endif pxa_set_ohci_info(&trizeps4_ohci_platform_data); pxa_set_ac97_info(NULL); -} - -static void __init trizeps4_map_io(void) -{ - pxa_map_io(); - iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc)); - - /* for DiskOnChip */ - pxa_gpio_mode(GPIO15_nCS_1_MD); - - /* for off-module PIC on ConXS board */ - pxa_gpio_mode(GPIO_PIC | GPIO_IN); - - /* UCB1400 irq */ - pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN); - - /* for DM9000 LAN */ - pxa_gpio_mode(GPIO78_nCS_2_MD); - pxa_gpio_mode(GPIO_DM9000 | GPIO_IN); - - /* for PCMCIA device */ - pxa_gpio_mode(GPIO_PCD | GPIO_IN); - pxa_gpio_mode(GPIO_PRDY | GPIO_IN); - - /* for I2C adapter */ - pxa_gpio_mode(GPIO117_I2CSCL_MD); - pxa_gpio_mode(GPIO118_I2CSDA_MD); + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, trizeps4_i2c_devices, + ARRAY_SIZE(trizeps4_i2c_devices)); - /* MMC_DET s.o. */ - pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN); - - /* whats that for ??? */ - pxa_gpio_mode(GPIO79_nCS_3_MD); - -#ifdef CONFIG_LEDS - pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */ - pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */ -#endif -#ifdef CONFIG_MACH_TRIZEPS4_CONXS #ifdef CONFIG_IDE_PXA_CF /* if boot direct from compact flash dont disable power */ trizeps_conxs_bcr = 0x0009; @@ -478,18 +555,24 @@ static void __init trizeps4_map_io(void) /* this is the reset value */ trizeps_conxs_bcr = 0x00A0; #endif - ConXS_BCR = trizeps_conxs_bcr; -#endif + BCR_writew(trizeps_conxs_bcr); + board_backlight_power(1); +} -#warning FIXME - accessing PM registers directly is deprecated - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x0158C000; - PGSR1 = 0x00FF0080; - PGSR2 = 0x0001C004; - /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ - PCFR |= PCFR_OPDE; +static void __init trizeps4_map_io(void) +{ + pxa_map_io(); + iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc)); + + if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) { + /* if flash is 16 bit wide its a Trizeps4 WL */ + __machine_arch_type = MACH_TYPE_TRIZEPS4WL; + trizeps4_flash_data[0].width = 2; + } else { + /* if flash is 32 bit wide its a Trizeps4 */ + __machine_arch_type = MACH_TYPE_TRIZEPS4; + trizeps4_flash_data[0].width = 4; + } } MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") @@ -503,3 +586,13 @@ MACHINE_START(TRIZEPS4, "Keith und Koep .timer = &pxa_timer, MACHINE_END +MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module") + /* MAINTAINER("Jürgen Schindele") */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = TRIZEPS4_SDRAM_BASE + 0x100, + .init_machine = trizeps4_init, + .map_io = trizeps4_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, +MACHINE_END diff -Nrup linux-2.6.27/drivers/leds/Kconfig linux-2.6.27-patched/drivers/leds/Kconfig --- linux-2.6.27/drivers/leds/Kconfig 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/drivers/leds/Kconfig 2008-10-19 22:45:13.000000000 +0200 @@ -190,6 +190,13 @@ config LEDS_TRIGGER_IDE_DISK This allows LEDs to be controlled by IDE disk activity. If unsure, say Y. +config LEDS_TRIGGER_CPU_BUSY + bool "LED CPU Busy Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to be controlled by CPU activity. + If unsure, say Y. + config LEDS_TRIGGER_HEARTBEAT tristate "LED Heartbeat Trigger" depends on LEDS_TRIGGERS diff -Nrup linux-2.6.27/drivers/leds/ledtrig-cpu-busy.c linux-2.6.27-patched/drivers/leds/ledtrig-cpu-busy.c --- linux-2.6.27/drivers/leds/ledtrig-cpu-busy.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.27-patched/drivers/leds/ledtrig-cpu-busy.c 2008-10-19 22:45:13.000000000 +0200 @@ -0,0 +1,48 @@ +/* + * CPU Idle/Activity Trigger + * + * Copyright 2008 Jurgen Schindele. + * + * Author: Jurgen Schindele + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include + +DEFINE_LED_TRIGGER(ledtrig_cpu); + +void ledtrig_cpu_busy(int busy) +{ + if (busy) + led_trigger_event(ledtrig_cpu, LED_FULL); + else + led_trigger_event(ledtrig_cpu, LED_OFF); +} +EXPORT_SYMBOL(ledtrig_cpu_busy); + +static int __init ledtrig_cpu_init(void) +{ + led_trigger_register_simple("cpu-busy", &ledtrig_cpu); + return 0; +} + +static void __exit ledtrig_cpu_exit(void) +{ + led_trigger_unregister_simple(ledtrig_cpu); +} + +module_init(ledtrig_cpu_init); +module_exit(ledtrig_cpu_exit); + +MODULE_AUTHOR("Jurgen Schindele"); +MODULE_DESCRIPTION("CPU busy/idle Trigger"); +MODULE_LICENSE("GPL"); diff -Nrup linux-2.6.27/drivers/leds/Makefile linux-2.6.27-patched/drivers/leds/Makefile --- linux-2.6.27/drivers/leds/Makefile 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/drivers/leds/Makefile 2008-10-19 22:45:13.000000000 +0200 @@ -27,5 +27,6 @@ obj-$(CONFIG_LEDS_PCA955X) += leds-pca9 # LED Triggers obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o +obj-$(CONFIG_LEDS_TRIGGER_CPU_BUSY) += ledtrig-cpu-busy.o obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o diff -Nrup linux-2.6.27/drivers/pcmcia/Kconfig linux-2.6.27-patched/drivers/pcmcia/Kconfig --- linux-2.6.27/drivers/pcmcia/Kconfig 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/drivers/pcmcia/Kconfig 2008-10-19 22:45:13.000000000 +0200 @@ -220,7 +220,7 @@ config PCMCIA_PXA2XX tristate "PXA2xx support" depends on ARM && ARCH_PXA && PCMCIA depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ - || MACH_ARMCORE || ARCH_PXA_PALM) + || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA) help Say Y here to include support for the PXA2xx PCMCIA controller diff -Nrup linux-2.6.27/drivers/pcmcia/Makefile linux-2.6.27-patched/drivers/pcmcia/Makefile --- linux-2.6.27/drivers/pcmcia/Makefile 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/drivers/pcmcia/Makefile 2008-10-19 22:45:13.000000000 +0200 @@ -71,6 +71,7 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o sa1111_generic.o pxa2xx_cs-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o pxa2xx_cs-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o +pxa2xx_cs-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o pxa2xx_cs-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x270.o pxa2xx_cs-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o diff -Nrup linux-2.6.27/drivers/pcmcia/pxa2xx_trizeps4.c linux-2.6.27-patched/drivers/pcmcia/pxa2xx_trizeps4.c --- linux-2.6.27/drivers/pcmcia/pxa2xx_trizeps4.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.27-patched/drivers/pcmcia/pxa2xx_trizeps4.c 2008-10-19 22:45:13.000000000 +0200 @@ -0,0 +1,263 @@ +/* + * linux/drivers/pcmcia/pxa2xx_trizeps4.c + * + * TRIZEPS4 PCMCIA specific routines. + * + * Author: Jürgen Schindele + * Created: 20 02, 2006 + * Copyright: Jürgen Schindele + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include "soc_common.h" + +extern void board_pcmcia_power(int power); + +static struct pcmcia_irqs irqs[] = { + { 0, IRQ_GPIO(GPIO_PCD), "cs0_cd" } + /* on other baseboards we can have more inputs */ +}; + +static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret, i; + /* we dont have voltage/card/ready detection + * so we dont need interrupts for it + */ + switch (skt->nr) { + case 0: + if (gpio_request(GPIO_PRDY, "cf_irq") < 0) { + pr_err("%s: sock %d unable to request gpio %d\n", __func__, + skt->nr, GPIO_PRDY); + return -EBUSY; + } + if (gpio_direction_input(GPIO_PRDY) < 0) { + pr_err("%s: sock %d unable to set input gpio %d\n", __func__, + skt->nr, GPIO_PRDY); + gpio_free(GPIO_PRDY); + return -EINVAL; + } + skt->irq = IRQ_GPIO(GPIO_PRDY); + break; + +#ifndef CONFIG_MACH_TRIZEPS_CONXS + case 1: +#endif + default: + break; + } + /* release the reset of this card */ + pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->irq); + + /* supplementory irqs for the socket */ + for (i = 0; i < ARRAY_SIZE(irqs); i++) { + if (irqs[i].sock != skt->nr) + continue; + if (gpio_request(IRQ_TO_GPIO(irqs[i].irq), irqs[i].str) < 0) { + pr_err("%s: sock %d unable to request gpio %d\n", + __func__, skt->nr, IRQ_TO_GPIO(irqs[i].irq)); + ret = -EBUSY; + goto error; + } + if (gpio_direction_input(IRQ_TO_GPIO(irqs[i].irq)) < 0) { + pr_err("%s: sock %d unable to set input gpio %d\n", + __func__, skt->nr, IRQ_TO_GPIO(irqs[i].irq)); + ret = -EINVAL; + goto error; + } + } + return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); + +error: + for (; i >= 0; i--) { + gpio_free(IRQ_TO_GPIO(irqs[i].irq)); + } + return (ret); +} + +static void trizeps_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + int i; + /* free allocated gpio's */ + gpio_free(GPIO_PRDY); + for (i = 0; i < ARRAY_SIZE(irqs); i++) + gpio_free(IRQ_TO_GPIO(irqs[i].irq)); + soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs)); +} + +static unsigned long trizeps_pcmcia_status[2]; + +static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + unsigned short status = 0, change; + status = CFSR_readw(); + change = (status ^ trizeps_pcmcia_status[skt->nr]) & + ConXS_CFSR_BVD_MASK; + if (change) { + trizeps_pcmcia_status[skt->nr] = status; + if (status & ConXS_CFSR_BVD1) { + /* enable_irq empty */ + } else { + /* disable_irq empty */ + } + } + + switch (skt->nr) { + case 0: + /* just fill in fix states */ + state->detect = gpio_get_value(GPIO_PCD) ? 0 : 1; + state->ready = gpio_get_value(GPIO_PRDY) ? 1 : 0; + state->bvd1 = (status & ConXS_CFSR_BVD1) ? 1 : 0; + state->bvd2 = (status & ConXS_CFSR_BVD2) ? 1 : 0; + state->vs_3v = (status & ConXS_CFSR_VS1) ? 0 : 1; + state->vs_Xv = (status & ConXS_CFSR_VS2) ? 0 : 1; + state->wrprot = 0; /* not available */ + break; + +#ifndef CONFIG_MACH_TRIZEPS_CONXS + /* on ConXS we only have one slot. Second is inactive */ + case 1: + state->detect = 0; + state->ready = 0; + state->bvd1 = 0; + state->bvd2 = 0; + state->vs_3v = 0; + state->vs_Xv = 0; + state->wrprot = 0; + break; + +#endif + } +} + +static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + int ret = 0; + unsigned short power = 0; + + /* we do nothing here just check a bit */ + switch (state->Vcc) { + case 0: power &= 0xfc; break; + case 33: power |= ConXS_BCR_S0_VCC_3V3; break; + case 50: + pr_err("%s(): Vcc 5V not supported in socket\n", __func__); + break; + default: + pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc); + ret = -1; + } + + switch (state->Vpp) { + case 0: power &= 0xf3; break; + case 33: power |= ConXS_BCR_S0_VPP_3V3; break; + case 120: + pr_err("%s(): Vpp 12V not supported in socket\n", __func__); + break; + default: + if (state->Vpp != state->Vcc) { + pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp); + ret = -1; + } + } + + switch (skt->nr) { + case 0: /* we only have 3.3V */ + board_pcmcia_power(power); + break; + +#ifndef CONFIG_MACH_TRIZEPS_CONXS + /* on ConXS we only have one slot. Second is inactive */ + case 1: +#endif + default: + break; + } + + return ret; +} + +static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt) +{ + /* default is on */ + board_pcmcia_power(0x9); +} + +static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) +{ + board_pcmcia_power(0x0); +} + +static struct pcmcia_low_level trizeps_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = trizeps_pcmcia_hw_init, + .hw_shutdown = trizeps_pcmcia_hw_shutdown, + .socket_state = trizeps_pcmcia_socket_state, + .configure_socket = trizeps_pcmcia_configure_socket, + .socket_init = trizeps_pcmcia_socket_init, + .socket_suspend = trizeps_pcmcia_socket_suspend, +#ifdef CONFIG_MACH_TRIZEPS_CONXS + .nr = 1, +#else + .nr = 2, +#endif + .first = 0, +}; + +static struct platform_device *trizeps_pcmcia_device; + +static int __init trizeps_pcmcia_init(void) +{ + int ret; + + if (!machine_is_trizeps4() && + !machine_is_trizeps4wl() && + !machine_is_trizeps5()) + return -ENODEV; + + trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!trizeps_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(trizeps_pcmcia_device, + &trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops)); + + if (ret == 0) + ret = platform_device_add(trizeps_pcmcia_device); + + if (ret) + platform_device_put(trizeps_pcmcia_device); + + return ret; +} + +static void __exit trizeps_pcmcia_exit(void) +{ + int i; + platform_device_unregister(trizeps_pcmcia_device); +} + +fs_initcall(trizeps_pcmcia_init); +module_exit(trizeps_pcmcia_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Juergen Schindele"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); diff -Nrup linux-2.6.27/drivers/rtc/Makefile linux-2.6.27-patched/drivers/rtc/Makefile --- linux-2.6.27/drivers/rtc/Makefile 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/drivers/rtc/Makefile 2008-10-19 22:45:13.000000000 +0200 @@ -43,6 +43,7 @@ obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o +obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8593.o obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o diff -Nrup linux-2.6.27/drivers/rtc/rtc-pcf8593.c linux-2.6.27-patched/drivers/rtc/rtc-pcf8593.c --- linux-2.6.27/drivers/rtc/rtc-pcf8593.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.27-patched/drivers/rtc/rtc-pcf8593.c 2008-10-19 22:56:29.000000000 +0200 @@ -0,0 +1,441 @@ +/* + * drivers/rtc/rtc-pcf8593.c + * + * Copyright (C) 2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Driver for PCF8583 RTC & RAM chip + * + * Converted to the generic RTC susbsystem by G. Liakhovetski (2006) + */ +#include +#include +#include +#include +#include +#include +#include +#include + +struct rtc_mem { + unsigned int loc; + unsigned int nr; + unsigned char *data; +}; + +struct pcf8593 { + struct i2c_client *client; + struct rtc_device *rtc; + unsigned char ctrl; +}; + +#define CTRL_STOP 0x80 +#define CTRL_HOLD 0x40 +#define CTRL_32KHZ 0x00 +#define CTRL_MASK 0x08 +#define CTRL_ALARMEN 0x04 +#define CTRL_ALARM 0x02 +#define CTRL_TIMER 0x01 + +static struct i2c_driver pcf8593_driver; + +#define get_ctrl(x) ((struct pcf8593 *)i2c_get_clientdata(x))->ctrl +#define set_ctrl(x, v) get_ctrl(x) = v + +#define CMOS_YEAR (9) +#define CMOS_CHECKSUM (15) + +static int pcf8593_get_datetime(struct i2c_client *client, struct rtc_time *dt) +{ + unsigned char buf[8], addr[1] = { 1 }; + struct i2c_msg msgs[2] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = addr, + }, { + .addr = client->addr, + .flags = I2C_M_RD, + .len = 6, + .buf = buf, + } + }; + int ret; + + dev_dbg(&client->dev, "%s: %p\n", "get_datetime", client); + + memset(buf, 0, sizeof(buf)); + + ret = i2c_transfer(client->adapter, msgs, 2); + if (ret == 2) { + dt->tm_year = buf[4] >> 6; + dt->tm_wday = buf[5] >> 5; + + buf[4] &= 0x3f; + buf[5] &= 0x1f; + + dt->tm_sec = BCD2BIN(buf[1]); + dt->tm_min = BCD2BIN(buf[2]); + dt->tm_hour = BCD2BIN(buf[3]); + dt->tm_mday = BCD2BIN(buf[4]); + dt->tm_mon = BCD2BIN(buf[5]) - 1; + } + + return ret == 2 ? 0 : -EIO; +} + +static int pcf8593_set_datetime(struct i2c_client *client, struct rtc_time *dt, int datetoo) +{ + unsigned char buf[8]; + int ret, len = 6; + + buf[0] = 0; + buf[1] = get_ctrl(client) | 0x80; + buf[2] = 0; + buf[3] = BIN2BCD(dt->tm_sec); + buf[4] = BIN2BCD(dt->tm_min); + buf[5] = BIN2BCD(dt->tm_hour); + + dev_dbg(&client->dev, "%s: %p\n", "set_datetime", client); + + if (datetoo) { + len = 8; + buf[6] = BIN2BCD(dt->tm_mday) | (dt->tm_year << 6); + buf[7] = BIN2BCD(dt->tm_mon + 1) | (dt->tm_wday << 5); + } + + ret = i2c_master_send(client, (char *)buf, len); + if (ret != len) + return -EIO; + + buf[1] = get_ctrl(client); + ret = i2c_master_send(client, (char *)buf, 2); + + return ret == 2 ? 0 : -EIO; +} + +static int pcf8593_get_ctrl(struct i2c_client *client, unsigned char *ctrl) +{ + *ctrl = get_ctrl(client); + return 0; +} + +static int pcf8593_set_ctrl(struct i2c_client *client, unsigned char *ctrl) +{ + unsigned char buf[2]; + + buf[0] = 0; + buf[1] = *ctrl; + set_ctrl(client, *ctrl); + + return i2c_master_send(client, (char *)buf, 2); +} + +static int pcf8593_read_mem(struct i2c_client *client, struct rtc_mem *mem) +{ + unsigned char addr[1]; + struct i2c_msg msgs[2] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = addr, + }, { + .addr = client->addr, + .flags = I2C_M_RD, + .len = mem->nr, + .buf = mem->data, + } + }; + + dev_dbg(&client->dev, "%s: %p\n", "read_mem", client); + + if (mem->loc < 8) + return -EINVAL; + + addr[0] = mem->loc; + + return i2c_transfer(client->adapter, msgs, 2) == 2 ? 0 : -EIO; +} + +static int pcf8593_write_mem(struct i2c_client *client, struct rtc_mem *mem) +{ + unsigned char addr[1]; + struct i2c_msg msgs[2] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = addr, + }, { + .addr = client->addr, + .flags = I2C_M_NOSTART, + .len = mem->nr, + .buf = mem->data, + } + }; + + dev_dbg(&client->dev, "%s: %p\n", "write_mem", client); + + if (mem->loc < 8) + return -EINVAL; + + addr[0] = mem->loc; + + return i2c_transfer(client->adapter, msgs, 2) == 2 ? 0 : -EIO; +} + +static int pcf8593_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct i2c_client *client = to_i2c_client(dev); + unsigned char ctrl, year[2]; + struct rtc_mem mem = { CMOS_YEAR, sizeof(year), year }; + int real_year, year_offset, err; + + printk("pcf8593_rtc_read_time\n "); + dev_dbg(&client->dev, "%s: %p\n", "read_time", client); + /* + * Ensure that the RTC is running. + */ + pcf8593_get_ctrl(client, &ctrl); + if (ctrl & (CTRL_STOP | CTRL_HOLD)) { + unsigned char new_ctrl = ctrl & ~(CTRL_STOP | CTRL_HOLD); + + printk(KERN_WARNING "RTC: resetting control %02x -> %02x\n", + ctrl, new_ctrl); + + if ((err = pcf8593_set_ctrl(client, &new_ctrl)) < 0) + return err; + } + + if (pcf8593_get_datetime(client, tm) || + pcf8593_read_mem(client, &mem)) + return -EIO; + + real_year = BCD2BIN(year[1]) * 100; + real_year += BCD2BIN(year[0]); + + printk("pcf8593 rtc-read year [%d/%x][%d/%x] real %d\n", year[0], year[0], year[1], year[1], real_year); + /* + * The RTC year holds the LSB two bits of the current + * year, which should reflect the LSB two bits of the + * CMOS copy of the year. Any difference indicates + * that we have to correct the CMOS version. + */ + year_offset = tm->tm_year - (real_year & 3); + if (year_offset < 0) + /* + * RTC year wrapped. Adjust it appropriately. + */ + year_offset += 4; + + printk("pcf8593 rtc-read tm [%d/%x] offset [%d/%x]\n", tm->tm_year, tm->tm_year, year_offset, year_offset); + tm->tm_year = (real_year) - 1900; + + return 0; +} + +static int pcf8593_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct i2c_client *client = to_i2c_client(dev); + unsigned char year[2], chk; + struct rtc_mem cmos_year = { CMOS_YEAR, sizeof(year), year }; + struct rtc_mem cmos_check = { CMOS_CHECKSUM, 1, &chk }; + unsigned int proper_year = tm->tm_year + 1900; + int ret; + + printk("pcf8593_rtc_set_time\n "); + dev_dbg(&client->dev, "%s: %p\n", "set_time", client); + /* + * The RTC's own 2-bit year must reflect the least + * significant two bits of the CMOS year. + */ + + ret = pcf8593_set_datetime(client, tm, 1); + if (ret) + return ret; + + ret = pcf8593_read_mem(client, &cmos_check); + if (ret) + return ret; + + ret = pcf8593_read_mem(client, &cmos_year); + if (ret) + return ret; + + chk -= year[1] + year[0]; + + year[1] = proper_year / 100; + year[0] = proper_year % 100; + + chk += year[1] + year[0]; + + ret = pcf8593_write_mem(client, &cmos_year); + + if (ret) + return ret; + + ret = pcf8593_write_mem(client, &cmos_check); + + return ret; +} + +static const struct rtc_class_ops pcf8593_rtc_ops = { + .read_time = pcf8593_rtc_read_time, + .set_time = pcf8593_rtc_set_time, +}; + +static ssize_t pcf8593_memory_read(struct kobject *kobj, struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct pcf8593 *pcf = i2c_get_clientdata(client); + return 0; +} + +static ssize_t pcf8593_memory_write(struct kobject *kobj, struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct pcf8593 *pcf = i2c_get_clientdata(client); + return 0; +} + +static struct bin_attribute memory_attr = { + .attr = { + .name = "memory", + .mode = S_IRUGO, + }, + .size = 64, + .read = pcf8593_memory_read, + .write = pcf8593_memory_write, +}; + +static int pcf8593_detach(struct i2c_client *client) +{ + int err; + struct pcf8593 *pcf = i2c_get_clientdata(client); + struct rtc_device *rtc = pcf->rtc; + + if (rtc) + rtc_device_unregister(rtc); + + if ((err = i2c_detach_client(client))) + return err; + + kfree(pcf); + return 0; +} + +static int __devinit pcf8593_probe(struct i2c_client *client) +{ + struct pcf8593 *pcf; + struct rtc_device *rtc; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + unsigned char buf[16], ad[1] = { 0 }; + int err; + struct i2c_msg msgs[2] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = ad, + }, { + .addr = client->addr, + .flags = I2C_M_RD, + .len = 16, + .buf = buf, + } + }; + + printk("pcf8593 addr %x\n", client->addr); + + if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) + return 0; + + pcf = kzalloc(sizeof(*pcf), GFP_KERNEL); + if (!pcf) + return -ENOMEM; + + pcf->client = client; + i2c_set_clientdata(client, pcf); + + printk("pcf8593 func addr %x\n", client->addr); + client->adapter = adapter; + client->driver = &pcf8593_driver; + + strlcpy(client->name, pcf8593_driver.driver.name, I2C_NAME_SIZE); + + if (i2c_transfer(client->adapter, msgs, 2) != 2) { + err = -EIO; + goto exit_kfree; + } + + printk("pcf8593 buf:\n "); + for (err=0; err < 16; err++) { + printk(" %02x", buf[err]); + } + printk("\npcf8593 ----------\n "); + +/* err = i2c_attach_client(client); + + if (err) + goto exit_kfree; + + printk("pcf8593 attached\n "); */ + rtc = rtc_device_register(pcf8593_driver.driver.name, &client->dev, + &pcf8593_rtc_ops, THIS_MODULE); + + if (IS_ERR(rtc)) { + err = PTR_ERR(rtc); + goto exit_detach; + } + + printk("pcf8593 rtc registered\n "); + + pcf->rtc = rtc; + set_ctrl(client, buf[0]); + + err = sysfs_create_bin_file(&client->dev.kobj, &memory_attr); + printk("pcf8593 mem created %d\n", err); + return 0; + +exit_detach: + i2c_detach_client(client); + +exit_kfree: + kfree(pcf); + + return err; +} + +static struct i2c_driver pcf8593_driver = { + .driver = { + .name = "rtc-pcf8593", + .owner = THIS_MODULE, + }, + .id = I2C_DRIVERID_PCF8593, + .probe = pcf8593_probe, + .remove = pcf8593_detach, +}; + +static __init int pcf8593_init(void) +{ + return i2c_add_driver(&pcf8593_driver); +} + +static __exit void pcf8593_exit(void) +{ + i2c_del_driver(&pcf8593_driver); +} + +module_init(pcf8593_init); +module_exit(pcf8593_exit); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("PCF8593 I2C RTC driver"); +MODULE_LICENSE("GPL"); diff -Nrup linux-2.6.27/include/linux/i2c-id.h linux-2.6.27-patched/include/linux/i2c-id.h --- linux-2.6.27/include/linux/i2c-id.h 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/include/linux/i2c-id.h 2008-10-19 22:45:13.000000000 +0200 @@ -82,6 +82,7 @@ #define I2C_DRIVERID_CS4270 94 /* Cirrus Logic 4270 audio codec */ #define I2C_DRIVERID_M52790 95 /* Mitsubishi M52790SP/FP AV switch */ #define I2C_DRIVERID_CS5345 96 /* cs5345 audio processor */ +#define I2C_DRIVERID_PCF8593 97 /* real time clock */ #define I2C_DRIVERID_OV7670 1048 /* Omnivision 7670 camera */ diff -Nrup linux-2.6.27/include/linux/leds.h linux-2.6.27-patched/include/linux/leds.h --- linux-2.6.27/include/linux/leds.h 2008-10-10 00:13:53.000000000 +0200 +++ linux-2.6.27-patched/include/linux/leds.h 2008-10-19 22:45:13.000000000 +0200 @@ -132,6 +132,12 @@ struct led_platform_data { struct led_info *leds; }; +#ifdef CONFIG_LEDS_TRIGGER_CPU_BUSY +extern void ledtrig_cpu_busy(int busy); +#else +#define ledtrig_cpu_busy(x) do {} while(0) +#endif + /* For the leds-gpio driver */ struct gpio_led { const char *name;