diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index a6698dc..db9d5fa 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -1,15 +1,23 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17 -# Sat Jun 24 22:45:14 2006 +# Linux kernel version: 2.6.20 +# Tue Mar 6 23:31:14 2007 # CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MTD_XIP=y CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -26,19 +34,25 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_SYSCTL=y -CONFIG_AUDIT=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -49,10 +63,11 @@ CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set -CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -67,7 +82,10 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -85,18 +103,28 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set @@ -104,12 +132,6 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_AT91RM9200 is not set # # Intel PXA2xx Implementations @@ -133,11 +155,15 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features # CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_IWMMXT=y CONFIG_XSCALE_PMU=y # @@ -147,16 +173,16 @@ CONFIG_XSCALE_PMU=y # # PCCARD (PCMCIA/CardBus) support # -CONFIG_PCCARD=m +CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA=y +# CONFIG_PCMCIA_LOAD_CIS is not set CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -CONFIG_PCMCIA_PXA2XX=m +CONFIG_PCMCIA_PXA2XX=y # # Kernel Features @@ -164,7 +190,8 @@ CONFIG_PCMCIA_PXA2XX=m CONFIG_PREEMPT=y # CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 -# CONFIG_AEABI is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -174,6 +201,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set CONFIG_LEDS=y CONFIG_LEDS_TIMER=y CONFIG_LEDS_CPU=y @@ -184,7 +212,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200n8" +CONFIG_CMDLINE="root=fe01 rootfstype=ext2 console=ttyS0,38400n8 loglevel=7" # CONFIG_XIP_KERNEL is not set # @@ -203,8 +231,7 @@ CONFIG_FPE_NWFPE_XP=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set -CONFIG_BINFMT_MISC=m -# CONFIG_ARTHUR is not set +# CONFIG_BINFMT_MISC is not set # # Power management options @@ -212,7 +239,8 @@ CONFIG_BINFMT_MISC=m CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set -CONFIG_APM=y +# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_APM is not set # # Networking @@ -228,6 +256,7 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set CONFIG_NET_KEY=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -246,24 +275,25 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -271,31 +301,15 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set # CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -# CONFIG_IP_NF_H323 is not set CONFIG_IP_NF_QUEUE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set - -# # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set @@ -318,7 +332,6 @@ CONFIG_VLAN_8021Q=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -378,6 +391,7 @@ CONFIG_IRTTY_SIR=m # CONFIG_USB_IRDA is not set # CONFIG_SIGMATEL_FIR is not set # CONFIG_PXA_FICP is not set +# CONFIG_MCS_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -420,6 +434,8 @@ CONFIG_WIRELESS_EXT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -434,10 +450,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y +# CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AFS_PARTS is not set @@ -445,12 +458,14 @@ CONFIG_MTD_REDBOOT_PARTS_READONLY=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set +CONFIG_FTL=y CONFIG_NFTL=y CONFIG_NFTL_RW=y CONFIG_INFTL=y -# CONFIG_RFD_FTL is not set +CONFIG_RFD_FTL=y +CONFIG_SSFDC=y # # RAM/ROM/Flash chip drivers @@ -492,7 +507,6 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x0 CONFIG_MTD_PHYSMAP_LEN=0x4000000 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_TRIZEPS4 is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_SHARP_SL is not set @@ -501,42 +515,47 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # Self-contained MTD device drivers # -# CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set +CONFIG_MTD_BLOCK2MTD=y # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set +CONFIG_MTD_DOC2000=y +CONFIG_MTD_DOC2001=y CONFIG_MTD_DOC2001PLUS=y CONFIG_MTD_DOCPROBE=y CONFIG_MTD_DOCECC=y -# CONFIG_MTD_DOCPROBE_ADVANCED is not set -CONFIG_MTD_DOCPROBE_ADDRESS=0 +CONFIG_MTD_DOCPROBE_ADVANCED=y +CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000 +CONFIG_MTD_DOCPROBE_HIGH=y +# CONFIG_MTD_DOCPROBE_55AA is not set # # NAND Flash Device Drivers # CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_H1900 is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_DISKONCHIP=y -# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 -# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set +CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y +CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000 +CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y +CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y # CONFIG_MTD_NAND_SHARPSL is not set # CONFIG_MTD_NAND_NANDSIM is not set # # OneNAND Flash Device Drivers # -# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_ONENAND=y +# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set +# CONFIG_MTD_ONENAND_GENERIC is not set +# CONFIG_MTD_ONENAND_OTP is not set # # Parallel port support @@ -556,8 +575,9 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_COUNT=8 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -566,6 +586,7 @@ CONFIG_BLK_DEV_INITRD=y # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -585,8 +606,7 @@ CONFIG_BLK_DEV_IDECS=m # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y -CONFIG_IDE_PXA_CF=y -CONFIG_IDE_ARM=y +# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set @@ -596,6 +616,8 @@ CONFIG_IDE_ARM=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -614,20 +636,21 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set # @@ -640,6 +663,11 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_PCMCIA_SYM53C500 is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set @@ -675,10 +703,14 @@ CONFIG_PHYLIB=y # MII PHY device drivers # # CONFIG_MARVELL_PHY is not set -CONFIG_DAVICOM_PHY=y +# CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -687,6 +719,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_SMC91X is not set CONFIG_DM9000=y +# CONFIG_SMC911X is not set # # Ethernet (1000 Mbit) @@ -731,10 +764,12 @@ CONFIG_PCMCIA_HERMES=m # CONFIG_PCMCIA_SPECTRUM is not set CONFIG_AIRO_CS=m # CONFIG_PCMCIA_WL3501 is not set +# CONFIG_USB_ZD1201 is not set CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y CONFIG_HOSTAP_CS=m +# CONFIG_ZD1211RW is not set CONFIG_NET_WIRELESS=y # @@ -756,6 +791,7 @@ CONFIG_PPP_BSDCOMP=m CONFIG_PPP_MPPE=m # CONFIG_PPPOE is not set # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -770,6 +806,7 @@ CONFIG_PPP_MPPE=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -789,22 +826,26 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_ATKBD=m # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set -CONFIG_MOUSE_SERIAL=y +CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +CONFIG_TOUCHSCREEN_UCB1400=y CONFIG_INPUT_MISC=y CONFIG_INPUT_UINPUT=m @@ -823,6 +864,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -862,15 +904,12 @@ CONFIG_SA1100_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set @@ -882,7 +921,6 @@ CONFIG_SA1100_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -902,6 +940,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_PXA=y CONFIG_I2C_PXA_SLAVE=y +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_PCA_ISA is not set @@ -924,18 +963,8 @@ CONFIG_SENSORS_EEPROM=m # # SPI support # -CONFIG_SPI=y -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -# CONFIG_SPI_BITBANG is not set -CONFIG_SPI_PXA2XX=m - -# -# SPI Protocol Masters -# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus @@ -947,6 +976,7 @@ CONFIG_SPI_PXA2XX=m # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -973,10 +1003,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -985,18 +1020,13 @@ CONFIG_HWMON=y # # Misc devices # - -# -# Multimedia Capabilities Port drivers -# -CONFIG_UCB1400=y -CONFIG_UCB1400_TS=y +# CONFIG_TIFM_CORE is not set # # LED devices # CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS is not set # # LED drivers @@ -1007,13 +1037,13 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_IDE_DISK=y +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -1024,17 +1054,19 @@ CONFIG_VIDEO_V4L2=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set -CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y # CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set # CONFIG_FB_VIRTUAL is not set # @@ -1082,7 +1114,7 @@ CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y @@ -1093,13 +1125,14 @@ CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VERBOSE_PRINTK=y -# CONFIG_SND_DEBUG is not set +CONFIG_SND_DEBUG=y +CONFIG_SND_DEBUG_DETECT=y +# CONFIG_SND_PCM_XRUN_DEBUG is not set # # Generic devices # CONFIG_SND_AC97_CODEC=y -CONFIG_SND_AC97_BUS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set @@ -1127,6 +1160,12 @@ CONFIG_SND_USB_AUDIO=m # Open Sound System # # CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y + +# +# HID Devices +# +CONFIG_HID=y # # USB support @@ -1179,16 +1218,13 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers @@ -1200,11 +1236,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -CONFIG_USB_TOUCHSCREEN=m -# CONFIG_USB_TOUCHSCREEN_EGALAX is not set -# CONFIG_USB_TOUCHSCREEN_PANJIT is not set -# CONFIG_USB_TOUCHSCREEN_3M is not set -# CONFIG_USB_TOUCHSCREEN_ITM is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1225,9 +1257,9 @@ CONFIG_USB_TOUCHSCREEN=m # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_USB_MON=y +# CONFIG_USB_MON is not set # # USB port drivers @@ -1236,23 +1268,64 @@ CONFIG_USB_MON=y # # USB Serial Converter support # -# CONFIG_USB_SERIAL is not set +CONFIG_USB_SERIAL=m +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -1262,7 +1335,7 @@ CONFIG_USB_MON=y # # USB Gadget Support # -CONFIG_USB_GADGET=y +CONFIG_USB_GADGET=m # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_NET2280 is not set @@ -1272,15 +1345,14 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_AT91 is not set CONFIG_USB_GADGET_DUMMY_HCD=y -CONFIG_USB_DUMMY_HCD=y +CONFIG_USB_DUMMY_HCD=m CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set # # MMC/SD Card support @@ -1289,6 +1361,7 @@ CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y CONFIG_MMC_PXA=y +# CONFIG_MMC_TIFM_SD is not set # # Real Time Clock @@ -1297,6 +1370,7 @@ CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # # RTC interfaces @@ -1304,17 +1378,24 @@ CONFIG_RTC_HCTOSYS_DEVICE="rtc0" CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # # RTC drivers # # CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_M48T86 is not set CONFIG_RTC_DRV_SA1100=y # CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set # # File systems @@ -1328,6 +1409,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1335,10 +1417,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1365,8 +1449,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15 # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set @@ -1376,18 +1462,17 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS_FS=y -CONFIG_JFFS_FS_VERBOSE=0 -CONFIG_JFFS_PROC_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1407,20 +1492,18 @@ CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y -CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y -CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y @@ -1430,7 +1513,9 @@ CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1504,23 +1589,48 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=m # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # -CONFIG_PROFILING=y -CONFIG_OPROFILE=y +# CONFIG_PROFILING is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set -CONFIG_DEBUG_USER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set # # Security options @@ -1531,21 +1641,28 @@ CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set -# CONFIG_SECURITY_SECLVL is not set # # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set -CONFIG_CRYPTO_MD4=y +# CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -1569,6 +1686,7 @@ CONFIG_CRYPTO_CRC32C=y # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC32=y @@ -1577,3 +1695,5 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_REED_SOLOMON=y CONFIG_REED_SOLOMON_DEC16=y +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 119c64b..47b14ac 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -393,11 +393,37 @@ static struct pxafb_mach_info sharp_lcd .pxafb_backlight_power = board_backlight_power, }; +static struct pxafb_mode_info toshiba_lcd_mode = { + .pixclock = 39720, + .xres = 640, + .yres = 480, + .bpp = 8, + .hsync_len = 63, + .left_margin = 12, + .right_margin = 12, + .vsync_len = 4, + .upper_margin = 32, + .lower_margin = 10, + .sync = 0, + .cmap_greyscale = 0, +}; + +static struct pxafb_mach_info toshiba_lcd = { + .modes = &toshiba_lcd_mode, + .num_modes = 1, + .cmap_inverse = 0, + .cmap_static = 0, + .lccr0 = LCCR0_Color | LCCR0_Act, + .lccr3 = 0x03400002, + .pxafb_backlight_power = board_backlight_power, +}; + static void __init trizeps4_init(void) { platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices)); - set_pxa_fb_info(&sharp_lcd); +/* set_pxa_fb_info(&sharp_lcd); */ + set_pxa_fb_info(&toshiba_lcd); pxa_set_mci_info(&trizeps4_mci_platform_data); pxa_set_ficp_info(&trizeps4_ficp_platform_data); diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index c7db403..30dd1a5 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -372,7 +372,7 @@ static int ucb1400_ts_open(struct input_ struct ucb1400 *ucb = idev->private; int ret = 0; - BUG_ON(ucb->ts_task); +/* BUG_ON(ucb->ts_task); */ ucb->ts_task = kthread_run(ucb1400_ts_thread, ucb, "UCB1400_ts"); if (IS_ERR(ucb->ts_task)) { diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index 86439a0..851dc18 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -45,7 +45,7 @@ */ #define MMC_SHIFT 3 -static int major; +static int major = 0xfe; /* * There is one mmc_blk_data per slot. diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 615d2b1..4911a20 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -431,6 +431,8 @@ dm9000_probe(struct platform_device *pde ndev->base_addr = base; ndev->irq = pdev->resource[1].start; + + db->irq_res = &pdev->resource[1]; db->io_addr = (void __iomem *)base; db->io_data = (void __iomem *)(base + 4); @@ -614,10 +616,11 @@ static int dm9000_open(struct net_device *dev) { board_info_t *db = (board_info_t *) dev->priv; + unsigned long flags = db->irq_res->flags & IRQF_TRIGGER_MASK; PRINTK2("entering dm9000_open\n"); - if (request_irq(dev->irq, &dm9000_interrupt, IRQF_SHARED, dev->name, dev)) + if (request_irq(dev->irq, &dm9000_interrupt, IRQF_SHARED|flags, dev->name, dev)) return -EAGAIN; /* Initialize DM9000 board */ diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 4276965..5ddb9e7 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -69,4 +69,4 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o sa1111_generic.o pxa2xx_cs-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o pxa2xx_cs-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o - +pxa2xx_cs-$(CONFIG_MACH_TRIZEPS4) += pxa2xx_trizeps4.o diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c new file mode 100644 index 0000000..dd219a7 --- /dev/null +++ b/drivers/pcmcia/pxa2xx_trizeps4.c @@ -0,0 +1,234 @@ +/* + * linux/drivers/pcmcia/pxa2xx_trizeps4.c + * + * TRIZEPS4 PCMCIA specific routines. + * + * Author: Jürgen Schindele + * Created: 20 02, 2006 + * Copyright: Jürgen Schindele + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include +#include + +#include "soc_common.h" + +extern void board_pcmcia_power(int power); + +static struct pcmcia_irqs irqs[] = { + { 0, TRIZEPS4_CD_IRQ, "PCMCIA0 CD" } +}; + +static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + /* we dont have voltage/card/ready detection + * so we dont need interrupts for it + * TODO set default state on power + */ + /* + * Setup default state of GPIO outputs + * before we enable them as outputs. + */ + GPSR(GPIO48_nPOE) = + GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | + GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | + GPIO_bit(GPIO54_nPCE_2); + + GPSR(GPIO102_nPCE_1) = GPIO102_nPCE_1; + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO102_nPCE_1_MD); + pxa_gpio_mode(GPIO54_nPCE_2_MD); + pxa_gpio_mode(GPIO104_pSKTSEL_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + /* card detect */ + pxa_gpio_mode(GPIO_PCD | GPIO_IN); + /* card interrupt */ + pxa_gpio_mode(GPIO_PRDY | GPIO_IN); + + switch (skt->nr) { + case 0: + skt->irq = TRIZEPS4_READY_NINT; + break; + + case 1: + default: + break; + } + /* release the reset of this card */ + /* FIXME Remove Card Reset ?? */ + printk(KERN_DEBUG "%s: sock %d irq %d\n", __FUNCTION__, skt->nr, skt->irq); + + /* supplementory irqs for the socket */ + /* FIXME are interrupts delivered by ConXS Board ?? */ + return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); +} + +static void trizeps_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + /* nothing to do */ +} + +static unsigned long trizeps_pcmcia_status[2]; + +static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state) +{ + unsigned short status=0, change; +#ifdef CONFIG_MACH_TRIZEPS4_CONXS + status = ConXS_CFSR; + change = (status ^ trizeps_pcmcia_status[skt->nr]) & ConXS_CFSR_BVD_MASK; + + if (change) { + trizeps_pcmcia_status[skt->nr] = status; + if (status & ConXS_CFSR_BVD1) { + /* enable_irq empty */ + } + else { + /* disable_irq empty */ + } + } + + switch (skt->nr) { + case 0: + /* just fill in fix states */ + state->detect = (GPLR(GPIO_PCD) & GPIO_bit(GPIO_PCD)) ? 0 : 1; + state->ready = (GPLR(GPIO_PRDY) & GPIO_bit(GPIO_PRDY)) ? 1 : 0; + state->bvd1 = (status & ConXS_CFSR_BVD1) ? 1 : 0; + state->bvd2 = (status & ConXS_CFSR_BVD2) ? 1 : 0; + state->vs_3v = (status & ConXS_CFSR_VS1) ? 0 : 1; + state->vs_Xv = (status & ConXS_CFSR_VS2) ? 0 : 1; + state->wrprot = 0; /* not available */ + break; + + case 1: + /* on ConXS we only have one slot second is inactive */ + state->detect = 0; + state->ready = 0; + state->bvd1 = 0; + state->bvd2 = 0; + state->vs_3v = 0; + state->vs_Xv = 0; + state->wrprot = 0; + break; + + } +#endif +} + +static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) +{ + int ret = 0; + unsigned short power = 0; + + /* we do nothing here just check a bit */ + switch (state->Vcc) { + case 0: power &= 0xfc; break; + case 33: power |= ConXS_BCR_S0_VCC_3V3; break; + case 50: + printk(KERN_ERR "%s(): Vcc 5V not supported in socket\n", __FUNCTION__); + break; + default: + printk(KERN_ERR "%s(): bad Vcc %u\n", __FUNCTION__, state->Vcc); + ret = -1; + } + + switch (state->Vpp) { + case 0: power &= 0xf3; break; + case 33: power |= ConXS_BCR_S0_VPP_3V3; break; + case 120: + printk(KERN_ERR "%s(): Vpp 12V not supported in socket\n", __FUNCTION__); + break; + default: + if(state->Vpp != state->Vcc) { + printk(KERN_ERR "%s(): bad Vpp %u\n", __FUNCTION__, state->Vpp); + ret = -1; + } + } + + switch (skt->nr) { + case 0: /* ony have one socket */ + board_pcmcia_power(power); + break; + + case 1: /* do nothing */ + default: + break; + } + + return ret; +} + +static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt) +{ + /* default is on */ + board_pcmcia_power(0x9); +} + +static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) +{ +} + +static struct pcmcia_low_level trizeps_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = trizeps_pcmcia_hw_init, + .hw_shutdown = trizeps_pcmcia_hw_shutdown, + .socket_state = trizeps_pcmcia_socket_state, + .configure_socket = trizeps_pcmcia_configure_socket, + .socket_init = trizeps_pcmcia_socket_init, + .socket_suspend = trizeps_pcmcia_socket_suspend, + .nr = 2, + .first = 0, +}; + +static struct platform_device *trizeps_pcmcia_device; + +static int __init trizeps_pcmcia_init(void) +{ + int ret; + + trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!trizeps_pcmcia_device) + return -ENOMEM; + + trizeps_pcmcia_device->dev.platform_data = &trizeps_pcmcia_ops; + + ret = platform_device_add(trizeps_pcmcia_device); + + if (ret) + platform_device_put(trizeps_pcmcia_device); + + return ret; +} + +static void __exit trizeps_pcmcia_exit(void) +{ + platform_device_unregister(trizeps_pcmcia_device); +} + +fs_initcall(trizeps_pcmcia_init); +module_exit(trizeps_pcmcia_exit); + +MODULE_LICENSE("GPL"); diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h index 9addd07..7281b53 100644 --- a/include/linux/mtd/doc2000.h +++ b/include/linux/mtd/doc2000.h @@ -81,9 +81,15 @@ * Others use readb/writeb */ #if defined(__arm__) +#if 1 +#define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)))) +#define WriteDOC_(d, adr, reg) do{ *(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)) = (__u16)d; wmb();} while(0) +#define DOC_IOREMAP_LEN 0x4000 +#else #define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)))) #define WriteDOC_(d, adr, reg) do{ *(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)) = (__u32)d; wmb();} while(0) #define DOC_IOREMAP_LEN 0x8000 +#endif #elif defined(__ppc__) #define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)))) #define WriteDOC_(d, adr, reg) do{ *(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)) = (__u16)d; wmb();} while(0)